|Focus Shot1(T6-2.4GHz Transmitter)||Focus Shot2(3GX MRS Programmable Flybarless System)||Focus Shot3(1.5V AA Zinc-Carbon Battery)|
|Instructions(T6-2.4GHz Transmitter) :||Specification(T6-2.4GHz Transmitter) :|
●15 Model Memory Capability.
●Logical control interface.
●Supports 4 types of swashplates.
●5 point throttle and pitch curves.
●Rudder gyro gain adjustment.
●Built in RF failsafe and battery failsafe protection.
●Supports both helicopters and fixed wing aircrafts.
Users must have a certain concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual before flying.
|● 6-Channel-2.4GHz S-FHSS transmitter(Up to 4-Channel at
●2.4GHz FHSS system)
● Transmitting on 2.4GHz band
● Operating system:2-stick,6-channel system
● Power supply:4-AA 1.5V Dry Cell batteries or 1.2V Ni-MH ●batteries
● Current drain:120mA
|Instructions(3GX MRS Programmable Flybarless System) :||Specification(3GX MRS Programmable Flybarless System) :|
|3GX MRS's was designed with goals of simple, convenient, light, and ease of adjustment. With the embedded brand new Futaba S-FHSS 2.4Ghz system/JR DSM2 and Spektrum DSM2/DSMX ,the 3GX MRS is more than just a flybarless system; it simplifies installation on small/micro sized helicopters since no receiver is needed. Its set up is extremely intuitive simplicity, just needs a few steps can easily complete the 3GX MRS adjustment. Optimized for T-Rex 250,T-Rex 450 and T-Rex 500 flybarless helicopters, with factory default setting, steady flying performance suitable for majority of pilots handling feel. In simple terms, the 3GX MRS provides pilots a more economical and reliable option.
1.Spektrum and JR Satellite antennas support (Replaces original factory receiver)
2.Built in Futaba S-FHSS 2.4Ghz receiver, directly compatible with Align T6 and Futaba S-FHSS transmitters.
3.Flybarless system designed specifically for T-Rex 250, T-Rex 450 and T-Rex 500, with small footprint, simplified setting process.
4.Optimized for T-Rex 250 , T-Rex 450 and T-Rex 500helicopters; with factory default setting suitable for majority of pilots.
5.Suitable for below flybarless models T-REX 250/T-REX 450/T-REX 500
|●Suitable Voltage Range:DC 3.5~8.4V
●Operating current consumption:<100mA @4.8V
●X and Y axis Operating Angle Range:-300~+300 degree
●Z axis Operating Angle Range:-600~+600 degree
●Sensor resolution:12 BIT
●Operating Temperature:-20~65 degree
●Compatible with T-REX 250、T-REX 450、T-REX 500
●Size:37.6x22.4x13 mm Size
●Weight: 10g Weight
|● ALIGN T6-2.4GHz Transmitter x 1
● 3GX MRS Programmable Flybarless System x 1
● 3GX MR Double Sided Tape × 2(37x20x2mm)
● 1.5V AA Zinc-Carbon Battery x 4
● Installation CD x 1